Prediction of Flow Discharge of Bantimurung Watershed Using HEC-HMS Model
Bantimurung watershed is the resource of irrigation water for the surrounding communities and the last few years the change in the magnitude of the maximum discharge and the minimum discharge fluctuates considerably. This study aimed to predict the flow discharge and investigate the validity of HEC-HMS model (Hydrologic Engineering Center's Hydrologic Modeling System) in predicting the flow discharge in the Bantimurung watershed of Maros Regency. The method used in this study was a quantitative method which included data collection of the research data in the field, such as rainfall data, discharge flow rate, soil texture and land use as well as the characteristics of Bantimurung watershed. Data analysis was done using HEC-HMS software. This software performed empirical simulation using rainfall, land slope, land use, soil physical characteristics and generate predicted discharge flow rate. The HEC-HMS model was calibrated using data from Public Work (PU) which were collected in 2006. The calibrated model was then validated using 2014 data. The calibration and validation results indicated that the predicted data were in good agreement with measured data R2 and NSE value of 0,546 and 0,595 respectively from the calibration process and 0,512 and 0,490 from the validation process. These results suggest that the HEC-HMS model can predict the measured discharge flow rate adequately
Most read articles by the same author(s)
- Nurilmi Dwi Mutmainna, Mahmud Achmad, Suhardi Suhardi, Pendugaan Lengas Tanah Inceptisol Pada Tanaman Hortikultura Menggunakan Citra Landsat 8 , Jurnal Agritechno: Jurnal Agritechno Vol. 10, Nomor 2, Oktober 2017
- Sitti Safirah Yuliani, Daniel Useng, Mahmud Achmad, Analisis Kandungan Nitrogen Tanah Sawah Menggunakan Spektrometer , Jurnal Agritechno: Jurnal Agritechno Vol. 10, Nomor 2, Oktober 2017
- Sitti Masyita Fachrie, Samsuar Samsuar, Mahmud Achmad, Penilaian Kinerja Sistem Irigasi Utama Daerah Irigasi Bantimurung Kabupaten Maros , Jurnal Agritechno: Jurnal AgriTechno Vol. 12, Nomor 1, April 2019
- Novita Sari, Iqbal Salim, Mahmud Achmad, Uji Kinerja Dan Analisis Biaya Mesin Pencacah Pakan Ternak (Chopper) , Jurnal Agritechno: Jurnal AgriTechno Vol. 11, Nomor 2, Oktober 2018
- Fitriyanti Hasnuri, Mahmud Achmad, Samsuar Samsuar, Rainfed Rice Fields Water Requirement based on The Planting Schedule of Deliberation of Peasant and Katam in Maniangpajo Subdistrict Wajo Regency , Jurnal Agritechno: Jurnal Agritechno Vol. 12, Nomor 2, Oktober 2019
- Elma Irawaty, Daniel Useng, Mahmud Achmad, Analisis Biofisik Tanaman Padi dengan Citra Drone (UAV) Menggunakan Software Agisoft Photoscan , Jurnal Agritechno: Jurnal Agritechno Vol. 10, Nomor 2, Oktober 2017
- Husnul Mubarak, Muhammad Rizal, Iqbal Iqbal, Abdul Waris, Muhammad Tahir Sapsal, Imam Suelfikhar, Design of a Greenhouse Room Temperature and Humidity Control System Using a DHT 22 Sensor , Jurnal Agritechno: Jurnal Agritechno Vol. 15, Nomor 2, Oktober 2022
- Fika Fikria, Mahmud Achmad, Daniel Useng, Pola dan Kapasitas Drainase Daerah Irigasi Bantimurung Kiri , Jurnal Agritechno: Jurnal Agritechno Vol. 10, Nomor 1, April 2017
- Samsuar Samsuar, Husnul Mubarak, Nunik Lestari, Estimation of Potential Evapotranspiration for Optimizing the Usage of Surface Irrigation in Wajo District , Jurnal Agritechno: Jurnal Agritechno Vol. 15, Nomor 2, Oktober 2022
- Kezia Pasa, Mahmud Achmad, Sitti Nur Faridah, Hydrograph Debit Banjir Rencana pada Daerah Aliran Sungai (DAS) Tallo Makassar dengan Model Hidrologi HEC-HMS , Jurnal Agritechno: Jurnal Agritechno Vol. 10, Nomor 2, Oktober 2017