Variable Rate Granular Fertilizer for Corn Plants
The need for corn has increased along with population growth. The increase in needs must of course be accompanied by an increase in corn production, one of which is by meeting the needs of plant nutrients during growth. In order to optimize plant growth, precision fertilization Need to be apply. However, the unavailability of precision fertilizer applicator for corn plants is an obstacle. This research is expected to be able to provide a precision rationing unit design for granular fertilizer in corn cultivation. The rationing unit is built using a 24 V 200 rpm DC motor and is controlled using an Arduino mega module. Allotment uses a rotor with a volume of 26.52 cm3 / rotation. Control using PID. The fertilizer used is NPK fertilizer. The test results show that the system can control fertilizer rationing with a 96% determination coefficient. And able to aplly NPK fertilizer up to 2 tons / ha.
Most read articles by the same author(s)
- Muhammad Fachruri, Junaedi Muhidong, Muhammad Tahir Sapsal, Analysis of the Effect of Temperature and Humidity of Room on Rice Seed Water Content in PT. Sang Hyang Seri (Persero) , Jurnal Agritechno: Jurnal Agritechno Vol. 12, Nomor 2, Oktober 2019
- Andi Paramita Guntur, Iqbal Iqbal, Muhammad Tahir Sapsal, Uji Kinerja Knapsack Sprayer Tipe Pb 16 Menggunakan Hollow Cone Nozzle dan Solid Cone Nozzle , Jurnal Agritechno: Jurnal Agritechno Vol. 9, Nomor 2, Oktober 2016
- Sitti Masyita Fachrie, Samsuar Samsuar, Mahmud Achmad, Penilaian Kinerja Sistem Irigasi Utama Daerah Irigasi Bantimurung Kabupaten Maros , Jurnal Agritechno: Jurnal AgriTechno Vol. 12, Nomor 1, April 2019
- Nunik Lestari, Samsuar Samsuar, Ervi Novitasari, Khaidir Rahman, Performance of Cabinet Dryer in the Red Ginger Drying by Utilizing the Waste Heat of Air Conditioner Condenser , Jurnal Agritechno: Jurnal Agritechno, Vol. 13, Number 1, April 2020
- Kasmira Kasmira, Abdul Waris, Muhammad Tahir Sapsal, Rancang Bangun Sistem Kendali Kecepatan Putar Motor DC menggunakan PID Controller pada Mesin Pengaduk , Jurnal Agritechno: Jurnal AgriTechno Vol. 11, Nomor 1, April 2018
- Fitriyanti Hasnuri, Mahmud Achmad, Samsuar Samsuar, Rainfed Rice Fields Water Requirement based on The Planting Schedule of Deliberation of Peasant and Katam in Maniangpajo Subdistrict Wajo Regency , Jurnal Agritechno: Jurnal Agritechno Vol. 12, Nomor 2, Oktober 2019
- Rizka Amaliah, Junaedi Muhidong, Muhammad Tahir Sapsal, Karakteristik Penurunan Kadar Air dan Perubahan Volume Bengkoang (Pachyrizus erosus) Selama Pengeringan , Jurnal Agritechno: Jurnal Agritechno Vol. 10, Nomor 1, April 2017
- Darmawati Darmawati, Suhardi Suhardi, Muhammad Tahir Sapsal, Pengaruh Lintasan Combine Harvester Terhadap Pemadatan Tanah Saat Beroperasi , Jurnal Agritechno: Jurnal AgriTechno Vol. 12, Nomor 1, April 2019
- Samsuar Samsuar, Husnul Mubarak, Nunik Lestari, Estimation of Potential Evapotranspiration for Optimizing the Usage of Surface Irrigation in Wajo District , Jurnal Agritechno: Jurnal Agritechno Vol. 15, Nomor 2, Oktober 2022
- Andi Azizah, Abdul Waris, Muhammad Tahir Sapsal, Application of Fuzzy Logic System in Nutrition Level Measurement in Hydroponic Systems , Jurnal Agritechno: Jurnal Agritechno Vol. 12, Nomor 2, Oktober 2019