Article Information
Issue Jurnal Agritechno, Vol. 14, Number 1, April 2021
Published 2021-04-30
Pages 42 - 50
DOI 10.70124/at.v14i1.389
Abstract Views 868
PDF Downloads 1206
Full Text ⬇ Pdf
Keywords
Gracilaria SP Pile Thicness Reversal Frequency
Jurnal Agritechno, Vol. 14, Number 1, April 2021

The Effect of Thickness and Reversal Frequency of Seaweed Gracilaria sp Drying

Authors
s
sitti aisah
a:1:{s:5:"en_US";s:22:"Universitas Hasanuddin";}, Indonesia
M
Mursalim Mursalim
Hasanuddin University, Indonesia
S
Samsuar Samsuar
Hasanuddin University, Indonesia
Abstract

Marketing of seaweed is still in the form of dried seaweed, but in fact the quality of the dried seaweed
that is sold by farmers has not met the standards required by the seaweed processing industry. One of
the efforts that can be made to improve the quality of dried seaweed is by optimizing drying, namely
by adjusting the thickness and reversal frequency. Pile thickness of will determine the length of time
drying is carried out, while the frequency of reversal will determine the spread of heat that occurs in
the seaweed pile. The aim of this study was to determine the drying speed in seaweed Gracilaria sp
drying and quality of dried sweaweed. The study was conducted with two treatments, namely pile
thickness of 12, 16 and 20 cm and treatment of reversal frequency with an interval of 3 hours, 4 hours
and 5 hours. The parameters observed in this study were a decrease in water content, drying rate, and
sensory test. The results showed that the drying of Gracilaria sp seaweed with a thickness
of 12 cm with a reversal frequency of each 3-4 hours is the best treatment in terms of color / brightness
and good texture with a drying rate of 0.462 kg H2O/kg solids hour.

Download Statistics — Total: 352 downloads
How to Cite
The Effect of Thickness and Reversal Frequency of Seaweed Gracilaria sp Drying. (2021). Jurnal Agritechno, 14(1), 42-50. https://doi.org/10.70124/at.v14i1.389
References
Abdillah (2018) ‘Model Pengeringan Lapisan Tipis Irisan Pare (Momordica charantia L)’, Skripsi. Makassar: Universitas Hasanuddin.
Angriani, A. (2020) ‘Kinerja Mesin Pengering Tipe Rak Bertenaga Hybrid Surya dan LPG dengan Sistem Kendali Fuzzy Expert untuk Pengeringan Sagu’, Skripsi. Makassar: Universitas Hasanuddin.
Lestari, N. Samsuar, Novitasari, E. and Rahman, K. (2020) ‘Kinerja Cabinet Dryer pada Pengeringan Jahe Merah dengan Memanfaatkan Panas Terbuang Kondensor Pendingin Udara’, Jurnal Agritechno, 13(1), pp. 57–70. doi: 10.20956/at.v13i1.250.
Rahayuningtyas, A. and Kuala, S. I. (2016) ‘Rahayuningtyas, Ari Kuala, Seri Intan’, Jurnal Penelitian dan Pengabdian Masyarakat, 4(1), pp. 99–104.
SNI 2690:2015 (2015) Rumput laut kering. Jakarta: Badan Standarisasi Nasional.
Sulistiyowati, E. (2015) ‘Pengaruh Umur Panen dan Metode Penjemuran Terhadap Mutu Fisik Rumput Laut Eucheuma cottonii sp’, Tesis. Bogor: Institut Pertanian Bogor.
Wibowo, A. (2019) ‘Rumput Laut, Komoditas Penting yang Belum Dioptimalkan’. Cipayung: Balai Besar Pengujian Penerapan Produk Kelautan dan Perikanan. Available at: https://kkp.go.id/djpdspkp/bbp2hp/artikel/14127-rumput-laut-komoditas-penting-yang-belum-dioptimalkan.
Yulianti, N. L., Wijaya, I. M. A. S. and Setiyo, Y. (2015) ‘Studi komparasi pengeringan rumput laut (Eucheuma cottonii) dengan metode dan tebal lapisan yang berbeda’, Jurnal Agrotekno, 17(2), pp. 56–60.

Most read articles by the same author(s)

<< < 1 2