Article Information
Issue Jurnal Agritechno, Vol. 14, Number 1, April 2021
Published 2021-04-30
Pages 51 - 56
DOI 10.70124/at.v14i1.415
Abstract Views 1655
PDF Downloads 1752
Full Text ⬇ Pdf
Keywords
Vacuum Sedder Atabel Rice Seed Paddy Field
Jurnal Agritechno, Vol. 14, Number 1, April 2021

Development of Rice Seed Planting Tool (ATABELA) using The Vacuum Method

Authors
M
Muhammad Tahir Sapsal
Hasanuddin University, Indonesia
M
Muhammad Fadlian
Hasanuddin University, Indonesia
S
Salengke Salengke
Hasanuddin University, Indonesia
Abstract

Direct seed planting tools or commonly abbreviated as ATABELA have been commonly used in rice cultivation in Indonesia. One of the problems that often occur in the use of this tool is the inconsistency in the number of seeds released. Besides, the seeds that are issued are usually more than three seeds, so that it can cause competition in the growth process. Therefore, it is necessary to develop direct seed planting tools with precise seed dosage. This study aims to design an applicator for planting rice seeds directly by dropping the seeds using vacuum pressure. Another goal is to know the pressure that can be generated as well as the forward speed required to produce the desired vacuum pressure. The first step in this research is to identify the pressure needed to move the seeds, then design a tool based on the pressure data. The test is carried out using a DC motor as a substitute for wheel rotation to determine the forward speed required to obtain the required pressure. The moisture content of the seeds used is 22.71% and the required pressure is 97 kPa (4 kPa under standard atmospheric pressure), the required forward speed is 2.5 m / s, so it is necessary to modify the ratio of the wheel pulley to the drive shaft.

Download Statistics — Total: 582 downloads
How to Cite
Development of Rice Seed Planting Tool (ATABELA) using The Vacuum Method . (2021). Jurnal Agritechno, 14(1), 51-56. https://doi.org/10.70124/at.v14i1.415
References
Ananto, E. (2001). Alat Tanam Padi Tebar Langsung Tipe Drum . Proyek Penelitian Pengembangan Pertanian Rawa Terpadu-ISDP. Badan Penelitian dan Pengembangan Pertanian.
As’ad, A, Sapsal, MT, Salengke S. (2018). Desain dan Pengujian Mekanisme Pemindah Benih Padi dengan Metode Hisap. Jurnal Agritechno, 11(1), 1 – 10.
Gaikwad, BB, Sirohi, NPS. (2008). Design of a Low-cost Pneumatic Seeder for Nursery Plug Trays. Biosystems Engineering 99 (3) 322– 329.
Hadiyanti, N. (2018). Uji Pengaruh Jumlah bibit per Lubang Tanam Terhadap Pertumbuhan dan Hasil Padi (Oryza sativa L.) di Green House. Jurnal Agrinika, 2(2), 127-134.
Singh, RC, Singh, G, Saraswat, DC. (2005) Optimization of Design an Operational Parameters of a Pneumatic Seed Metering Device for Planting Cottonseeds. Biosystems Engineering, 92 (4), 429 – 438.
Soos, P, Szule, ZS, Fuzy, J . (1989). A Comparative Evaluation of Modern Sugar Beet Drills. Bulletin of the University of Agricultural Science, Gödöllo. 1, 166–170.
Zhang, X, Song, J. (2009). Design and Research on Rice Precision Needle-like Vacuum Seeder. Nongye jixie xuebao, 40(3), 69-71.

Most read articles by the same author(s)

<< < 1 2 3 > >>