KARAKTERISTIK BIOPELET KARBONISASI BIOMASSA BERBASIS DAUN JATI DAN JAGUNG MENGGUNAKAN PEREKAT TANAH LIAT

##plugins.themes.academic_pro.article.sidebar##

Published Apr 22, 2025
https://doi.org/10.70124/at.vi.1804
Download
PDF
Statistic

Downloads

Download data is not yet available.
Jurnal Agritechno Vol. 18, Nomor 1, April 2025

##plugins.themes.academic_pro.article.main##

Ropiudin Ropiuidn
Universitas Jenderal Soedirman
Toibah Toibah
Universitas Jenderal Soedirman
Dian Windy Dwiasi
Universitas Jenderal Soedirman
Kavadya Syska
Universitas Nahdlatul Ulama Al Ghazali Cilacap

Abstract

Biomass carbonization plays a vital role in the production of biopellets as a sustainable and environmentally friendly energy source. This study aimed to evaluate the physicochemical characteristics of carbonized biopellets, including density, moisture content, ash content, volatile matter, combustion rate, and mechanical durability. The biopellets were produced from a mixture of teak leaves, corn cobs, and corn stalks, with clay as a binder, and subjected to carbonization under different formulations to assess their influence on final product quality. The experimental design employed a Completely Randomized Design (CRD) with nine treatment combinations and three replications, resulting in a total of 27 experimental units. The treatments consisted of variations in raw material composition (K1, K2, K3) and clay binder proportions (P1, P2, P3). Analyses included physical, chemical, thermal, and durability assessments. Data were analyzed using Analysis of Variance (ANOVA) followed by Duncan’s Multiple Range Test (DMRT) at a 5% significance level. Results indicated that the carbonized biopellets had density values ranging from 0.49 to 0.56 g/cm³, moisture content from 5.34% to 6.82%, ash content from 20.38% to 34.24%, volatile matter from 66.82% to 79.88%, combustion rate from 0.03 to 0.05 g/min, and mechanical durability ranging from 43.72% to 55.03%. The composition of raw materials significantly influenced most parameters, except combustion rate and durability. Meanwhile, binder proportion had a highly significant effect on all parameters except for durability, which showed a significant effect. Based on the results, the carbonized biopellets met the SNI 8021-2014 standard requirements for moisture and volatile matter, while density and ash content were outside the specified limits.

##plugins.themes.academic_pro.article.details##

How to Cite
Ropiuidn, R., Toibah, T., Dwiasi, D. W., & Syska, K. (2025). KARAKTERISTIK BIOPELET KARBONISASI BIOMASSA BERBASIS DAUN JATI DAN JAGUNG MENGGUNAKAN PEREKAT TANAH LIAT. Jurnal Agritechno, 18(1), 1–14. https://doi.org/10.70124/at.vi.1804
Crossref
Scopus
Google Scholar
Europe PMC

References

  1. Alsaqoor, S., Borowski, G., Alahmer, A., & Beithou, N. (2022). Using of adhesives and binders for agglomeration of particle waste resources. Advances in Science and Technology. Research Journal, 16(3), 124-135.
  2. Bumanis, G., Korjakins, A., & Bajare, D. (2022). Environmental benefit of alternative binders in construction industry: life cycle assessment. Environments, 9(1), 6.
  3. Butler, J. W., Skrivan, W., & Lotfi, S. (2023). Identification of optimal binders for torrefied biomass pellets. Energies, 16(8), 3390.
  4. Cui, X., Yang, J., & Wang, Z. (2021). A multi-parameter optimization of the bio-pellet manufacturing process: Effect of different parameters and different feedstocks on pellet characteristics. Biomass and Bioenergy, 155, 106299.
  5. Duan, F., Yang, F., Mu, B., Zhu, Y., & Wang, A. (2024). Production of functional materials from clay minerals and plants for natural resource utilization and sustainable development. Journal of Cleaner Production, 143586.
  6. Harlina, A.C., Ropiudin, & Ritonga, A.M. (2021). Pengaruh Kadar Perekat Molase dan Lama Pengeringan terhadap Proses Pembuatan Biobriket dari Tempurung Kelapa dan Sekam Padi. Journal of Agricultural and Biosystem Engineering Research, 2(2): 19-27.
  7. He, H., Wang, Y., Sun, Y., Sun, W., & Wu, K. (2024). From raw material powder to solid fuel pellet: A state-of-the-art review of biomass densification. Biomass and Bioenergy, 186, 107271.
  8. Herjunata, R., Noviandini, S.R., Kholisoh, S.D. (2020). Pengaruh Variasi Perekat pada Briket Berbahan Limbah Tempurung Kelapa. Prosiding Seminar Nasional Teknik Kimia “Kejuangan”, 1415 Juli, Yogyakarta. P. 1.
  9. Iryani, D. A., Rakaseri, I., Azhar, A., Haryanto, A., Hidayat, W., & Hasanudin, U. (2023, May). Thermogravimetric assessment for combustion characteristic of torrefied pellet biomass from agricultural solid waste. In IOP Conference Series: Earth and Environmental Science (Vol. 1187, No. 1, p. 012019). IOP Publishing.
  10. Iskandar, N., Sulardjaka, S., Munadi, M., Nugroho, S., Muhamadin, R. C., & Fitriyana, D. F. (2020, April). The effect of water content and binder made from cassava starch and densification pressure on the quality of rice husk bio-pellets. In Journal of Physics: Conference Series (Vol. 1517, No. 1, p. 012019). IOP Publishing.
  11. Jha, M. K., & Dev, M. (2024). Impacts of Climate Change. In Smart Internet of Things for Environment and Healthcare (pp. 139-159). Cham: Springer Nature Switzerland.
  12. Kowalski, Z., Makara, A., Kulczycka, J., Generowicz, A., Kwaśnicki, P., Ciuła, J., & Gronba-Chyła, A. (2024). Conversion of sewage sludge into biofuels via different pathways and their use in agriculture: a comprehensive review. Energies, 17(6), 1383.
  13. Mortadha, H., Kerrouchi, H. B., Al-Othman, A., & Tawalbeh, M. (2025). A Comprehensive Review of Biomass Pellets and Their Role in Sustainable Energy: Production, Properties, Environment, Economics, and Logistics. Waste and Biomass Valorization, 1-33.
  14. Ngene, G. I., Bouesso, B., González, M., & Nzihou, A. (2024). A review on biochar briquetting: Common practices and recommendations to enhance mechanical properties and environmental performances. Journal of Cleaner Production, 143193.
  15. Nuryawan, A., Syahputra, R. S., Azhar, I., & Risnasari, I. (2021, November). Basic properties of the mangrove tree branches as a raw material of wood pellets and briquettes. In IOP Conference Series: Earth and Environmental Science (Vol. 891, No. 1, p. 012005). IOP Publishing.
  16. Qanitah, Akbar, Y. D.F., Ulma, Z., & Hananto, Y. (2023). Peningkatan Kualitas Briket Ampas Kopi Menggunakan Perekat Kulit Jeruk Melalui Metode Torefaksi Terbaik. Journal of Engineering Science and Technology (JESTY), 1(1): 32-43.
  17. Ristianingsih, Y., Ulfa, A., & Syafitri, R. (2015). Pengaruh Suhu dan Konsentrasi Perekat terhadap Karakteristik Briket Bioarang Berbahan Baku Tandan Kosong Kelapa Sawit dengan Proses Pirolisis. Konversi, 4(2): 45-51.
  18. Ropiudin & Syska, K. (2022). Quality Analysis of Biobriquette from Carbonized Coconut Shell and Cassava Peel with Cassava Flour Adhesive. Journal of Agricultural and Biosystem Engineering Research, 3(1): 19-38.
  19. Ropiudin & Syska, K. (2023). Karakterisasi Kualitas Biobriket Campuran Tempurung Kelapa dan Sekam Padi dengan Variasi Perekat dan Ukuran Serbuk. Journal of Agricultural and Biosystem Engineering Research, 3(2): 13-26.
  20. Ropiudin, Dwiasi, D.W., Sudarmaji, A., & Syska, K. (2023). Pelatihan Pembuatan Biobriket sebagai Sumber Energi Pengolahan Gula Kelapa Kristal pada UMKM Gula Kelapa Kristal Desa Sunyalangu Kabupaten Banyumas Nanggroe: Jurnal Pengabdian Cendikia, 2(7):10-19.
  21. Sanchez, P. D. C., Aspe, M. M. T., & Sindol, K. N. (2022). An overview on the production of bio-briquettes from agricultural wastes: methods, processes, and quality. Journal of Agricultural and Food Engineering, 1, 0036.
  22. Sarker, T. R., Nanda, S., Meda, V., & Dalai, A. K. (2023). Densification of waste biomass for manufacturing solid biofuel pellets: a review. Environmental Chemistry Letters, 21(1), 231-264.
  23. Suhasman, S., Detti, Y. A., Putra, P. K. T., Ikhlas, K., Arisandi, H. E. R. U., Rachmadona, N. O. V. A., Saptadi, D., & Gustan, P. (2024). Biopellets from Four Shrub Species for Co-firing in East Indonesia. Journal of the Korean Wood Science and Technology, 52(6), 539-554.
  24. Syska, K., & Ropiudin, R. (2023a). Study of "Green Manufacturing" on Rural Crystal Coconut Sugar SMEs. Jurnal Keteknikan Pertanian Tropis dan Biosistem, 11(1), 13–27.
  25. Syska, K., & Ropiudin, R. (2023b). Drying Characteristics and Hedonic Quality of Crystal Coconut Sugar using Rotating Rack Type Dryer with Energy Source from Thermal Waste and Biomass. Jurnal Agritechno, 16(1), 19–28.
  26. Syska, K., & Ropiudin. (2020). Perpindahan Panas pada Pengering Tipe Drum Berputar pada Kondisi Tanpa Beban. Agroteknika, 3(1): 1-15.
  27. Tumuluru, J. S., & Fillerup, E. (2020). Briquetting characteristics of woody and herbaceous biomass blends: Impact on physical properties, chemical composition, and calorific value. Biofuels, Bioproducts and Biorefining, 14(5), 1105-1124.
  28. Yanti, R.N., Ratnaningsih, A.T., & Ikhsani, H. (2022). Pembuatan Bio-Briket dari Produk Pirolisis Biochar Cangkang Kelapa Sawit sebagai Sumber Energi Alternatif. Jurnal Ilmiah Pertanian, 19(1): 11-18.

Most read articles by the same author(s)

1 2 > >>